Geographical coverage and channel setup
Last updated
Last updated
Currently KPN’s network supports the 16 channels in Table 1. When configuring devices, customers must make sure they support at least the first 3 LoRaWAN default frequencies and enable ADR, because the other channels will be added dynamically and could vary for each region.
ChIndex
IsDefault
LC
Frequency
MinDR
MaxDR
Enabled
0
Yes
1
868.1 MHz
0
5
✅*
1
Yes
2
868.3 MHz
0
5
✅*
2
Yes
3
868.5 MHz
0
5
✅*
3
Region set
4
867.1 MHz
0
5
✅
4
Region set
5
867.3 MHz
0
5
✅
5
Region set
6
866.8 MHz
0
5
✅
6
Region set
7
867.7 MHz
0
5
✅
7
Region set
8
867.9 MHz
0
5
✅
8
Region set
9
865.1 MHz
0
5
✅
9
Region set
10
865.3 MHz
0
5
✅
10
Region set
11
865.5 MHz
0
5
✅
11
Region set
12
865.7 MHz
0
5
❌**
12
Region set
13
865.9 MHz
0
5
✅
13
Region set
14
866.1 MHz
0
5
✅
14
Region set
15
866.4 MHz
0
5
✅
15
Region set
16
866.6 MHz
0
5
✅
*) mandatory channels **) Channel always disabled through channel mask LinkADRReq command, because of relative high interference on this frequency
Within the EU and US, one chipset can be used to support the 868 and 900 MHz LoRaWAN frequencies. As frequencies differ, a different antenna should be used.
