SenML

Introduction on the SenML data representation

For Freemium projects, the way KPN Things processes device data to SenML changed (per December 13th 2022). Read all the details about the Changes in KPN SenML.

SenML is the default data format for device data in KPN Things. Currently KPN Things only supports SenML in JSON. We plan to support SenML in CBOR in the future.

Introduction

A SenML message is officially called a SenML pack. One SenML pack consists of one or more SenML records. One SenML record expresses a single measurement. That way a SenML pack expresses a set of measurements

The first record in a SenML pack always contains base information. Base information expresses from which device the measurements are from (base name) and the moment the measurements were taken (base time).

There are different type of SenML records:

  • Number record - for communicating a number measurement

  • Boolean record - for communicating an on/off measurement

  • String record - for communicating a string measurement

  • Data record - for communicating raw data measurement

Below you find a non-exhaustive example of a SenML pack:

SenML example (explanation below)
[
  {"bn": "urn:dev:DEVEUI:0123456789ABCDEF:", "bt": 1.58565075E9, 
   "n": "temperature", "v": 20.5, "u": "Cel"},
  {"n": "batteryVoltage", "v": 3.6, "u": "V", "t": 10},
  {"n": "active", "vb": true},
  {"n": "modus", "vs": "Active"},
  {"n": "image", "vd": "aGFsbG9vb29vISE="}
]

Attributes

This section explains the attributes you can use to express your measurements in SenML

Base values

When the base name and/or base time values are present in the pack, they are available in the first measurement of the pack and applicable for all the measurements in the pack.

Base name - bn - required in pack

The base name of a SenML pack states which device the measurements are from. It should contain a unique resource name. The parts of the base name, which are colon separated, are as following:

  • urn stands for unique resource name.

  • dev means we are identifying a device.

  • DEVEUI is the type of device identifier used to identify the device.

  • 01234567890ABCDEF is the DevEUI, the device identifier.

In the example above we identify a LoRa device by its DEVEUI. If we would have an M2M device, we would identify it by its IMEI and the base name would be as following: urn:dev:IMEI:0123456789012345:.

A base name always ends with a colon :!

Base time - bt - optional in pack

The timestamp of the measurement in UNIX timestamp format. If KPN Things receives a measurement without base time, the time of receiving the measurement is taken as base time. SenML being sent by KPN Things will always contain a base time.

Name - n - required in record

Name of the individual measurement.

The (..) name MUST consist only of characters out of the set "A" to "Z", "a" to "z", and "0" to "9", as well as "-", ":", ".", "/", and "_"; furthermore, it MUST start with a character out of the set "A" to "Z", "a" to "z", or "0" to "9". - The SenML spec, RFC8428 section 4.5.1

When designing your SenML measurement format for M2M and Internet devices, you should take into account our Common measurements list. By using as much name and unit pairs from that list, you achieve higher compatibility with current and future data processing features.

Unit - u - optional in record

Unit of the measurement. Write your u-values in camel case, so start with a lower case character.

Time - t - optional in record

The timestamp of an individual record relative to the base time in seconds.

Example

You have a SenML pack with "bt": 1600185600 (2020-09-15T16:00:00+00:00) and the pack contains a measurement with "t": -60.

The timestamp of that measurement is then 2020-09-15T15:59:00+00:00, so one minute earlier then the base time.

Number value - v - required in number record

Value of the number measurement.

Boolean value - vb - required in boolean record

Boolean value for a boolean measurement. Should be true or false.

String value - vs - required in string record

String value for a string measurement.

Data value - vd - required in data record

Data value for a data measurement. Should be a base64 encoded string.

And more...

There are more attributes in the SenML specification, but these values are not used by KPN Things. You can read about them in the Sensor Measurements Lists specification:

Client libraries

For easier integration with KPN Things we have created client libraries in C and Python for you to use in your devices.

ThingsML, a SenML extension with extra compression

To make SenML more suitable for communication over LoRa, we have introduced ThingsML. ThingsML is a valid extension of SenML that introduces measurement indices. We have listed several common measurements, allowing you to only send the measurement index number instead of sending the complete name and unit of the measurement. Learn more about ThingsML.

Last updated