1M2M ED1608
Last updated
Last updated
For the complete 1M2M ED1608 series running default firmware, Full, Basic and Radio-Only.
Supported network type(s): KPNLORA
Device Specification ID: supported-1m2m-ed1608
Device Specification UUID: 0eb7379d-881a-42b2-a4d6-abe1f9fa205c
Decoders | decoderSpecificationUUID | Description |
---|---|---|
+ LoRa Geolocation data |
| Add LoRa Geolocation data to messages where location could be calculated. |
= Raw LoRa payload |
| Forward the raw LoRa payload and port number without decoding. |
= Raw LoRa payload (v2) |
| Forward the raw LoRa payload and port number without decoding. |
› Decoded 1M2M ED16xx payload |
| Decoder for all messages from devices with default 1M2M ED16xx firmware. |
› Decoded 1M2M ED16xx payload (v2) |
| Decoder for all messages from devices with default 1M2M ED16xx firmware. |
Encoders | encoderSpecificationUUID | Description |
---|---|---|
= Raw LoRa payload |
| Send raw LoRa payload to your device. |
Add LoRa Geolocation data to messages where location could be calculated.
Forward the raw LoRa payload and port number without decoding.
Expected SenML records
name | type | unit |
---|---|---|
payload | string | |
port | number |
Forward the raw LoRa payload and port number without decoding.
This decoder also decodes Geolocation and Local Gateway data.
The following SenML records can be present, amongst others:
name | type | unit | example | description |
---|---|---|---|---|
payload | string |
| The LoRa hex payload | |
port | number |
| The LoRa port used to send this uplink |
SenML can be structured in different ways, and we do not guarantee the examples below will look the same as what you will receive on your Destination. To make sure you can handle the SenML optimally, take a look at our documentation about Understanding and Interpreting SenML Data.
Decoder for all messages from devices with default 1M2M ED16xx firmware.
Expected SenML records
name | type | unit |
---|---|---|
AnIn1 | number | V |
AnIn2 | number | V |
AnIn3 | number | V |
AnIn4 | number | V |
Barom | number | P |
BeamX | number | rad |
BeamY | number | rad |
BeamZ | number | rad |
CmdAck | number | |
Count | number | Count |
FixAge | number | |
GravX | number | |
GravY | number | |
GravZ | number | |
MagX | number | |
MagY | number | |
MagZ | number | |
Max1Amp | number | |
Max1Freq | number | Hz |
Max2Amp | number | |
Max2Freq | number | Hz |
Max3Amp | number | |
Max3Freq | number | Hz |
MaxBaro | number | P |
MaxDx | number | |
MaxDy | number | |
MaxDz | number | |
MaxHum | number | %RH |
MaxTemp | number | Cel |
MinBaro | number | P |
MinHum | number | %RH |
MinTemp | number | Cel |
Mod | number | |
NumSat | number | |
Ow0 | number | Cel |
Ow1 | number | Cel |
Ow2 | number | Cel |
Ow3 | number | Cel |
Ow4 | number | Cel |
RepMod | number | |
RunHrs | number | Count |
Status | number | |
Timer | number | Count |
VibAmp | number | |
VibFrq | number | Hz |
VibGai | number | |
batteryLevel | number | %EL |
batteryLevel | number | V |
distance | number | m |
humidity | number | %RH |
latitude | number | lat |
longitude | number | lon |
profile | number | |
temperature | number | Cel |
Decoder for all messages from devices with default 1M2M ED16xx firmware.
Bugfixes from '› Decoded 1M2M ED16xx payload':
latitude
and longitude
were not always decoded correctly.
fixAge
was not decoded correctly for values above 60 minutes.
This decoder also decodes Geolocation and Local Gateway data.
The following SenML records can be present, amongst others:
name | type | unit | example | description |
---|---|---|---|---|
AnIn1 | number | V |
| |
AnIn2 | number | V |
| |
AnIn3 | number | V |
| |
AnIn4 | number | V |
| |
Barom | number | P |
| |
batteryLevel | number | %EL |
| |
batteryLevel | number | V |
| |
BeamX | number | rad |
| |
BeamY | number | rad |
| |
BeamZ | number | rad |
| |
CmdAck | number |
| ||
Count | number | Count |
| |
Dig1Al | boolean |
| ||
Dig2Al | boolean |
| ||
distance | number | m |
| |
FixAge | number |
| ||
GeoAl | boolean |
| ||
GravX | number |
| ||
GravY | number |
| ||
GravZ | number |
| ||
GrvRot | boolean |
| ||
humidity | number | %RH |
| |
latitude | number | lat |
| |
longitude | number | lon |
| |
MagRot | boolean |
| ||
MagX | number |
| ||
MagY | number |
| ||
MagZ | number |
| ||
Max1Amp | number |
| ||
Max1Freq | number | Hz |
| |
Max2Amp | number |
| ||
Max2Freq | number | Hz |
| |
Max3Amp | number |
| ||
Max3Freq | number | Hz |
| |
MaxBaro | number | P |
| |
MaxDx | number |
| ||
MaxDy | number |
| ||
MaxDz | number |
| ||
MaxHum | number | %RH |
| |
MaxTemp | number | Cel |
| |
MinBaro | number | P |
| |
MinHum | number | %RH |
| |
MinTemp | number | Cel |
| |
Mod | number |
| ||
MotAl | boolean |
| ||
Move | boolean |
| ||
NumSat | number |
| ||
Ow0 | number | Cel |
| |
Ow1 | number | Cel |
| |
Ow2 | number | Cel |
| |
Ow3 | number | Cel |
| |
Ow4 | number | Cel |
| |
profile | number |
| ||
RepMod | number |
| ||
RunHrs | number | Count |
| |
ShkAl | boolean |
| ||
Start | boolean |
| ||
Status | number |
| ||
Stop | boolean |
| ||
temperature | number | Cel |
| |
Timer | number | Count |
| |
VibAl | boolean |
| ||
VibAmp | number |
| ||
VibFrq | number | Hz |
| |
VibGai | number |
| ||
Vibr | boolean |
|
SenML can be structured in different ways, and we do not guarantee the examples below will look the same as what you will receive on your Destination. To make sure you can handle the SenML optimally, take a look at our documentation about Understanding and Interpreting SenML Data.
00 payload
01 payload
02 payload
03 payload
04 payload
06 payload
08 payload
09 payload
0A payload
0B payload
0C payload
0D payload
Protocol: LoRa downlink
Description: Send raw LoRa payload to your device.
Multiple commands in one downlink: No
Input mapping:
Name: payloadHex
(raw input)