Own LoRa device (preset connectivity)
Connect a LoRa device which has built in LoRa connectivity that came with the device. You will need to enter the DevEUI, AppEUI, and AppKey of this device during registration in KPN Things.
Supported network type(s):
KPNLORA
Device Specification ID:
own-lora-with-keys
Device Specification UUID:
c11ef507-293f-4f04-ad82-e2f1c777c339
Decoders | decoderSpecificationUUID | Description |
---|---|---|
+ LoRa Geolocation data |
| Add LoRa Geolocation data to messages where location could be calculated. |
= Raw LoRa payload |
| Forward the raw LoRa payload and port number without decoding. |
= Raw LoRa payload (v2) |
| Forward the raw LoRa payload and port number without decoding. |
= Raw LoRa payload Extended |
| Forward the raw LoRa payload and lora network metadata without decoding. |
= Raw LoRa payload Extended (v2) |
| Forward the raw LoRa payload and lora network metadata without decoding. |
› Decoded ThingsML for LoRa payload |
| Decoder for ThingsML for LoRa, a generic LoRa payload protocol by KPN. |
› Decoded ThingsML for LoRa payload (v2) |
| Decoder for ThingsML for LoRa, a generic LoRa payload protocol by KPN. |
Encoders | encoderSpecificationUUID | Description |
---|---|---|
= Raw LoRa payload |
| Send raw LoRa payload to your device. |
+ LoRa Geolocation data
Add LoRa Geolocation data to messages where location could be calculated.
= Raw LoRa payload
Forward the raw LoRa payload and port number without decoding.
Expected SenML records
name | type | unit |
---|---|---|
payload | string | |
port | number |
= Raw LoRa payload (v2)
Forward the raw LoRa payload and port number without decoding.
This decoder also decodes Geolocation and Local Gateway data.
The following SenML records can be present, amongst others:
name | type | unit | example | description |
---|---|---|---|---|
payload | string |
| The LoRa hex payload | |
port | number |
| The LoRa port used to send this uplink |
Example SenML
SenML can be structured in different ways, and we do not guarantee the examples below will look the same as what you will receive on your Destination. To make sure you can handle the SenML optimally, take a look at our documentation about Understanding and Interpreting SenML Data.
= Raw LoRa payload Extended
Forward the raw LoRa payload and lora network metadata without decoding.
Expected SenML records
name | type | unit |
---|---|---|
ADRbit | number | |
Channel | string | |
DevLrrCnt | number | |
FCntDn | number | |
FCntUp | number | |
LrrESP | string | |
LrrRSSI | string | |
LrrSNR | string | |
SpFact | number | |
SubBand | string | |
payload | string | |
port | number |
Raw LoRa payload Extended (v2)
Forward the raw LoRa payload and lora network metadata without decoding.
Fixes from '= Raw LoRa payload Extended':
LrrRSSI
is changed to anumber
.LrrSNR
is changed to anumber
.LrrESP
is changed to anumber
.
This decoder also decodes Geolocation and Local Gateway data.
The following SenML records can be present, amongst others:
name | type | unit | example | description |
---|---|---|---|---|
ADRbit | number |
| Adaptive Data Rate indicator | |
Channel | string |
| Lora channel of the transmission | |
DevLrrCnt | number |
| Amount of gateways that received the message | |
FCntDn | number |
| The downlink framecounter | |
FCntUp | number |
| The uplink framecounter | |
LrrRSSI | number |
| Received Signal Strength Indicator | |
LrrSNR | number |
| Signal to Noise Ratio | |
payload | string |
| raw hex payload string | |
port | number |
| LoRa port used | |
SpFact | number |
| Spreading factor used | |
SubBand | string |
| Lora band of the transmission |
Example SenML
SenML can be structured in different ways, and we do not guarantee the examples below will look the same as what you will receive on your Destination. To make sure you can handle the SenML optimally, take a look at our documentation about Understanding and Interpreting SenML Data.
› Decoded ThingsML for LoRa payload
Decoder for ThingsML for LoRa, a generic LoRa payload protocol by KPN.
› Decoded ThingsML for LoRa payload (v2)
Decoder for ThingsML for LoRa, a generic LoRa payload protocol by KPN.
This decoder also decodes Geolocation and Local Gateway data.
Example SenML
SenML can be structured in different ways, and we do not guarantee the examples below will look the same as what you will receive on your Destination. To make sure you can handle the SenML optimally, take a look at our documentation about Understanding and Interpreting SenML Data.
The resulting SenML completely depends on the ThingsML input and can produce almost any type of SenML output. The decoded ThingsML provided below is just an illustration of what is possible.
= Raw LoRa payload encoding
Protocol: LoRa downlink
Description: Send raw LoRa payload to your device.
Multiple commands in one downlink: No
Input mapping:
Name:
payloadHex
(raw input)
Last updated